Gunboards Forums banner
1 - 13 of 13 Posts

· Diamond Bullet Member/Moderator
56,873 Posts
The motor still works. The stop in the chuck doesn't work. It's got a carbide cutter stuck in it. I might work on it and see if I can fix it.
Loosen the chuck then push the cutter into the dremil before pulling out. You should able to buy a replacement chuck at any HW store. All of mine died at the switch, I have wired one to be on when I plug it in and turn it on and off with a foot switch, it works but it is dangerous if I forget how I have it wired :)
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.