Gunboards Forums banner
1 - 1 of 1 Posts

· Registered
3,241 Posts
During the 18.2/18.3 period Toriimatsu changed the finishing of the trigger guard by making the trigger pin flush with the guard housing. The only way I can see of changing out the spring is to pull out the old one from the bottom and and try pushing in the new spring. I have never had cause to change out the trigger spring so I have to ask, does yours really need to be changed. The sear bar spring is easy to get at once you remove the sear bar, getting the sear bar retainer pin back in can be a pain but you shouldn't have any problems with it.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.