Gunboards Forums banner
1 - 2 of 2 Posts

· Registered
33 Posts
A commercial reloader who is a friend of mine puts his ammo in a cement mixer (with the vanes removed) and tumbles his to get the lube off and shine the cases up-no problems.

Still, I've heard forever that it is not safe to do so as the powder granules will break apart and the burn rate will be altered resulting, possibly, in unsafe pressures.

If I were to do it, I would do it for a very short time.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.