Gunboards Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
181 Posts
Ditto! I'm not a big fan of shiny. What did you use on the brass?
 

·
Registered
Joined
·
136 Posts
Discussion Starter · #4 ·
This was a kit so after sanding and polishing off the machine and casting marks I made a paste of black powder and water and painted it on several times and let it sit then cleaned off the black and oiled it up well
 

·
Registered
Joined
·
181 Posts
Thanks for the info, might have to try that. I usually go with cold blue until it's very dark, then rub it down with a rag.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top