Gunboards Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,137 Posts
Discussion Starter · #1 ·
I have a few of the Polish made Mausers that came out of Spain in the 1960s. A few years ago (maybe 10 years) Mauserdad and I were shooting and I pulled one out to warm it up only to find it was missing its firing pin. Now I cannot recall which one of my rifles was the one missing the firing pin. I pulled the one I suspect needs repair only to find the safety is jammed in the fire position. It cannot be forced upward so I cannot take the bolt down. Any tips how to get the bolt apart or force the safety up? I hate to use a lot of force but I am thinking about using a padded wrench to try to force the safety up so I can take the bolt down. My experiences with using force on small arms have been, well, poor. So, before I force the issue is there a trick I am missing?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top