Gunboards Forums banner
1 - 1 of 1 Posts

· Copper Bullet member
Joined
·
443 Posts
have you tried adjusting the tension spring to custom fit the scope mount to the rifle? you can find directions on kalinka optics page. That AES-10B rail you show looks similar to the rail I received with a BP-02 and didnt need since I had a different rail on my saiga. I was able to reset the spring position to align with it. Where it is probably catching is the center support and a matter of overall top to bottom length. The saiga rail is the same height at other aks
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top