Gunboards Forums banner
1 - 1 of 1 Posts

· Gold Bullet member
Joined
·
1,563 Posts
I also have a set of Romanian wood to refinish. What is the best method for stripping the old finish off of these stock sets?

Thanks!
Sanding only takes about an hour and a half to do even if you go over it three times. It's really pretty easy. Do it first with an orbital sander and 60 grit paper, then hand-sand with 100-grit, and end up with 200-grit for a really smooth finish. Alternately I've heard that denatured alcohol gets it off pretty well.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top