Gunboards Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14,761 Posts
I don't know if this was mentioned, but there are items called a dowel centers.
They Come in pairs of different sizes. You drill a hole in one piece of the wood and insert the centers. The other side of it has a point, so you would aligen the two pieced of wood together, than tap the undrilled piece against the drilled one. This leaves a mark on the undrilled piece exactly where it should be drilled.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top