Gunboards Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
320 Posts
You will notice that right behind the extractor "claw" there is a ridge that rides in a groove on the bolt. You will also notice that the groove does not extend all the way around the bolt body ... it is missing on the bottom.

Rotate the extractor to the bottom of the bolt body so that it is out of that groove and then tap it forward off from the rear.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top