Gunboards Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
1,554 Posts
Discussion Starter · #1 · (Edited)
Also found at the Estate sale. It has no markings on the reciever other than the cer# and another # on the other side of the reciever. Were some of these never marked not even with the maker? And It wasn't scrubed. The bolt also has no markings. The only stamps are a few of the "shaking hands" like on my Arges.
 

· Registered
Joined
·
650 Posts
That's neat! I sure would have taken it (of course I haven't seen a gun at a yard sale or estate sale that I wouldn't take :) )
 

· Registered
Joined
·
943 Posts
It's scrubbed.
It started life with an Argentine crest, as a long-rifle.
When sold to Peru, the Argentines required that the Argentine crests be scrubbed.
It's been cut down into a "short-rifle", and the Lange-Viser rear sight was added circa 1912.
 

· Registered
Joined
·
1,554 Posts
Discussion Starter · #4 ·
Thats what I thought but there are no sighns of scrubbing.I used a strait edge and micrometer and there is no metal missing. I have a scrubed Arge. and you can tell the diffrence.It was just never stamped on top or the side. I'll bring it to the TMCS Thanksgiving weekend and see what the experts think.
 

· Gold Bullet member
Joined
·
1,229 Posts
Via Webster's "Argentine Mauser Rifles 1871-1959" Argentina ceded 16,000 rifles which half were unassembled lots of part to Peru. They were returned to Germany where the Arg. crest was removed and the Peru crest was stamped. Several rifles have been found that had no crest. The Lange-Vizie sight was used because of the improved spitzer bullets.

Hope this helps.
(should have bought that rifle, I had it in my hand and IDed it and still let it go!)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top