[LukeFF]

Is there any place that sells original SVT gas regulators? I've beaten mine up a bit and would like to replace it with another original one.

 

[rocker98]

An original may be as beaten up as yours. I believe a sponcer sells an excellent repro. After all, you want the SVT in tip top shape, don't you?

Gary

 

[Vaarok]

I've never heard of any source, and I treasure the untouched like-new spare one I lucked into more preciously than the SVT bayonet I have.

 

[Youngblood]

Is there any place that sells original SVT gas regulators? ...

http://www.e-gunparts.com/product.asp?chrProductSKU=460680

 

[LukeFF]

http://www.e-gunparts.com/product.asp?chrProductSKU=460680

Thanks! Ordered one this past evening.

 

[7.62x54r]

Good luck. I ordered an SVT gas piston from them a few years ago and it was in worse shape than the one I wanted to replace!

 

[Mike O]

Good luck. I ordered an SVT gas piston from them a few years ago and it was in worse shape than the one I wanted to replace!

Me too. the one I got looked like it sat in saltwater for 40 years. Totally worthless.

 

[GonzoX]

FWIW, I purchased a brand spanking new one from the Milsurp.com guy but the problem is that it does not have the tick marks and size markings on it at all so there is no way to align the holes correctly.

I guess I just wanted it for safekeeping as a last resort part since e-gunparts only sells used and abused ones.

The other option is to buy three or four from e-gunparts and use the best of the four. That is an expensive option though.

I personally had to open up the holes with a drill bit a little more on a spare one that I had to get my rifle to cycle reliably. Not exactly historically correct but it solved my problem and gave me a reliable SVT40.

Gary, which sponsor sells new repro made ones? I would kill to get one.

 

[LukeFF]

Got the regulator in this week, and thankfully it's in excellent condition. No dings or rounded-off corners, and the bluing on it looks really good. Dropped it into the piston and it moves just fine.

 

[Vic]

I have two originals for sale one Russian and one Finnish version . The original is a packaged with a oriignal scope breech cover and a original scope with repro mount. Drop me a note for details. These are the key shaped snipers tools.

 

[Vic]

I have two originals for sale one Russian and one Finnish version . The original is a packaged with a original scope breech cover and a original scope with repro mount. Drop me a note for details. These are the key shaped snipers tools. If you want a cheaper version that works and is good quality see Black River Gunsmithing in the sponsors section.

 

[skywarp]

Ooh, a Vic double-tap! Or would that be double-stroke?

 

[GonzoX]

I am looking for a Finnish gas regulator that has the 2.2 setting on it myself.

I would kill for that if I could fine one for sale or trade.

 

[Youngblood]

Got the regulator in this week, and thankfully it's in excellent condition. No dings or rounded-off corners, and the bluing on it looks really good. Dropped it into the piston and it moves just fine.

I'm glad to hear that they sent you a good one, Luke!

Kim