Gunboards Forums banner
1 - 8 of 8 Posts

· Registered
Joined
·
188 Posts
Discussion Starter · #1 · (Edited)
New to me anyway. Tried 3 types of fmj ammo and None of them fed. Actual bullet would be 1/3 way in chamber and the rest would be hanging down. They did not even come close to feeding.
Noticed absolutely no numbers or letters on either of the 2 15round mags. Is this right or did I buy a gun that some guy put in after market mags that did not work for him either.
Also, all the numbers match on the gun but it does say just 9mm Luger on the side of gun. I assume this means 9x19 parabellum and not 9x18 mak.
Am stuck here and do not feel like putting a whole lot of money in a gun I just paid 395.00 for.
Did not even get a shot off.Bud
 

· Registered
Joined
·
188 Posts
Discussion Starter · #10 ·
checked for case remnant. Nothing there. Will order a recoil spring tomorrow.
Looking at the schematic That came in the directions for the gun is there some sort of spring inside the recoil spring. I have the metal guide thing but the schematic says recoil spring and a smaller spring inside called a spring slide stop. Any one know about this or do you all just have the recoil springs. Thanks again guys
 

· Registered
Joined
·
188 Posts
Discussion Starter · #22 ·
The guy who sold it to me had as it turns out dropped it in water. I did not notice anything upon inspecting it to buy it. My gunsmith bought a new mag and still did not feed. Turns out the extractor was rusted and the spring was so rusted it was easily broken. Any way he took it ALL apart and replaced and lubed everything and is supposedly a new gun now. I will find out tomorrow when I try again at the range. Would have just asked for my money back but it is a beautiful gun with all new internals at this point. The guy gave me 4 boxes of Win white box for my trouble so I was alright with it. He thought he had cleaned all the water out of it. Whatever. Bud
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top