Gunboards Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
458 Posts
Discussion Starter · #1 ·
I have a Sterling 25ACP magazine that has a broken footplate. Darn thing is plastic and Superglue does not hold. The body of the mag is steel as is the tab at the bottom that one slides off to disassemble the mag if needing to. What super duper adhesive is available to fix this?
 

·
Silver Bullet member
Joined
·
4,675 Posts

·
Silver Bullet member
Joined
·
36,239 Posts
Not contact cement - it's just too weak. Works on plastic laminates only because of the very large surface it covers and needs a rough surface to stick to even there.

There are epoxys, super glues and polyurethane glues made specifically for plastics. See if you can figure out what kind of plastic it is, go to a Home depot and/or Lowes, and see what they've got. But the glue may cost a good percentage of a new magazine!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top