[Gun_Shy]

Before I break down and have one made, does anyone have any idea where to find the front adjustable sight blade (and screw) used with the early MAB R-22 target pistol. This pistol was sold in the US by WAC as "Le Chasseur" and at least the .22 short version was sold by MAB as the "Olympic."

A previous owner left the base but replaced the adjustable blade, adjusting screw, and mounting screw with a simple non-adjustable blade and brass mounting screw.

I've checked the usual sources in the US (Numrich has been "sold out" for several years) with no luck.

See the photo for the early front sight -- MAB later switched to a different front sight.

BTW, if anyone has the actual dimensions of the early blade that would be helpful if I have to have one made -- all I have are photographs.

Thanks,

Bill

 

[jackthursby]

I have a similar probablem. I need the dimension of the extractor, pin and spring. Wanna swap dimensions?

 

[Gun_Shy]

If you're not in too much a hurry, I can do this. I am leaving for about 10 days and that level of disassembling would probably have to wait until I get back.

Bill