Gunboards Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter #1
thank to DocAV info I could make some rimfire usable cases for my Austrian Wanzl cal 14,5x33RF, find hewith some photoes of the aluminium disk used to measure the offcentre and the freshly manufactured case (annealed). The size of the case has been calculated on a chamber cast of my rifle, not fired yet.
 

·
Super Moderator
Joined
·
9,260 Posts
Rimfire Wanzl

Caro GianLuca,
Felicitazioni...ottimo capolavoro...bella trovata l'indicatore del colpo del percussore

Now I just have to do something better.

Saluti,
Doc AV
AV Ballistics
 

·
Registered
Joined
·
99 Posts
Discussion Starter #4
field results of the rimfire project

After some works I could fire test the Wanzl rifle 13,9x33RF; the brass was home made, the bullet is a 540 grs Enfield muzzleloading alloy casted 90/10 sized to 14,4mm (.567in), the load is 60grs of swiss black powder N3 (2fg), the primer is a 6mmRF blank.
shown is the final cartridge, the whole family and the target at 50 mt( this last has been corrected by cancelling the holes of another rifle I test).
Ps one hole (first shot) is missing hitting approx 1 mt high at 50 mt, it took few shots before discovering where to aim.
 
1 - 4 of 4 Posts
Top