Gunboards Forums banner
1 - 1 of 1 Posts

· Gold Bullet member
6,253 Posts
The AA sight wing spring, a shaped leaf spring, not to be confused with the coil spring for the rear site level adjustment latch, is shaped to fit into the slider sight wing slot alongwith the sight wing itself. It is just a matter of unscrewing the sight wing screw, removing the wing in its vertical position and using sturdy tweezers to remove the leaf spring, and reinstalling onto the other slider. The shape of the leaf spring may differ depending on arsenal, age or what ? but one example I had was an issue when I used a spring off of a Nagoya wing and attached onto a T-K long wing. The spring did not have the correct contour and the wings does not really "click" into each position, a bit on the loose side.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.