Gunboards Forums banner

Indian FAL lowers. What's the deal?

2499 Views 1 Reply 2 Participants Last post by  mawkie
I acquired a stripped one of these due to the supplier grabbing one from the wrong pile. He is sending me another L1A1 example so all is good.

However, I was intrigued by the way this Indian lower was built. The retainer looks very much like the one on an L1A1, and the rear of the receiver looks pretty close to a metric. Are these essentially inch pattern with a metric rear, or are there more differences. Will these lowers work on regular Imbel DSA and Century lowers or are they sufficiently different that the gun either does not function or is permanently full-auto.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.