Gunboards Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Have a decent non -import stamped BCD 4. Have a few questions.

What type of front and rear band should these have? My rear band is milled and unnumbered. My front band is stamped with 3 blobs of weld on either side of the barrel. It is not numbered to the gun and completely without bluing.

It has a stamped floorplate that is stamped byf with a Waa135 waffenamt. The laminated stock is likewise stamped Waa135 (or 139, it is hard to tell). It has the takedown hole in stock and a plane cupped buttplate. The stock is not stamped withany thing else.

How far off from the correct configuration is this?

Thanks in advance
 

·
Moderator / Diamond member
Joined
·
3,687 Posts
It's hard to say- it may be 100% correct as some bcd4 marked receivers show up built as Mauser Oberndorf guns. Pics would help!
 

·
Registered
Joined
·
28 Posts
Discussion Starter #3
Here are some pics

Here are some pics. Thanks again for any help.
 
1 - 3 of 3 Posts
Top