Gunboards Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
2,734 Posts
Discussion Starter #1 (Edited)
Pettson
Posted - 11/17/2006 : 1:22:15 PM
--------------------------------------------------------------------------------

Here are a few oddities.
First a complete barracks cleaning kit. Or at least almost complete. I'm beginning to regret the purchase, since I keep tripping over it in the workshop...
Contains what was considered needed to keep the Mausers and the SMG's in shape.

Second is the slightly scarce armourer's parts roll. Contains numerous small numbered compartments, a parts list and most small parts needed to keep the m/96, m/38, m/41 plus the SMG's and the pistols running.

http://old.gunboards.com/uploaded/Pettson/20061117132033_rengmtrl_1.jpg
Download Attachment:
86.06 KB

http://old.gunboards.com/uploaded/Pettson/20061117132054_rengmtrl_2.jpg
Download Attachment:
60.05 KB

http://old.gunboards.com/uploaded/Pettson/20061117132120_utrvap_3.jpg
Download Attachment:
49.76 KB

http://old.gunboards.com/uploaded/Pettson/20061117132137_utrvap_1.jpg
Download Attachment:
46.01 KB
 

·
Registered
Joined
·
541 Posts
Swedish Barracks cleaning rod

Good Evening,
Is this the cleaning rod you were after? I've used it in conjunction with both the muzzle guide (pictured) or breach guide and haven't had an issue. It is Crown C marked and has what feels like ball bearings to aid in pushing the patches through.

Regards,
Michael
 

Attachments

·
Moderator/Diamond with Oak Clusters Bullet member
Joined
·
8,614 Posts
Barracks cleaning box

Here is a poor photo of a barracks cleaning box . There were 6 cleaning bolts in this box as well as 6 extra long cleaning rods for cleaning the M96 from the rear . The standard rifle cleaning rod and extension are not long enough to clean from the rear .
 

Attachments

·
Super Moderator
Joined
·
105,691 Posts
That is one sweet setup Swede!
 

·
Registered
Joined
·
3,309 Posts
Here is a poor photo of a barracks cleaning box . There were 6 cleaning bolts in this box as well as 6 extra long cleaning rods for cleaning the M96 from the rear . The standard rifle cleaning rod and extension are not long enough to clean from the rear .
swede, picture 3 is exactly what I needed, thank you very much!
 

·
Moderator/Diamond with Oak Clusters Bullet member
Joined
·
8,614 Posts
Did you get that parts roll from Dana ? I have never seen another parts roll anywhere else . Nice piece for your collection .
 

·
Moderator / Gold Bullet member
Joined
·
2,661 Posts
Did you get that parts roll from Dana ? I have never seen another parts roll anywhere else . Nice piece for your collection .
I had one from Sweden. Took about 2 years to sell all the parts inside.

Almost all the parts. I think I still have a few items.

Dutch
 

·
Super Moderator
Joined
·
105,691 Posts
I had one from Sweden. Took about 2 years to sell all the parts inside.

Almost all the parts. I think I still have a few items.

Dutch
Have any NOS extractors and the extractor "seats" <-- that part the extractor fastens to around the bolt body ?
 

·
Moderator / Gold Bullet member
Joined
·
2,661 Posts
Have any NOS extractors and the extractor "seats" <-- that part the extractor fastens to around the bolt body ?
Only one and I don't want to part with it. That part is called the extractor collar.

Genuine extractors seem to be the hardest NOS to find. But I've not noticed any breakage of that part in all the years I've been shooting the m/96... 44 years.

Dutch
 

·
Super Moderator
Joined
·
105,691 Posts
I don't need it for a replacement. I need it for its first placement. I have a bunch of new husky parts I'm using to build a completely new rifle. Every parts is NOS Husquvarna made.
 
1 - 16 of 16 Posts
Top