Gunboards Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 · (Edited)
My Springfield 03/A3 is the most accurate rifle I own but I find I must aim well underneath my target point to get a bulls-eye at 100 to 300 yards. I want to lower my front sight blade to remedy this and was wondering, are there different size blades available for the 03/A3 and if so, where can they be purchased? I have seen replacement blades for sale but they are listed without size specification. I don't want to be reduced to filing the existing blade if it is unnecessary. Can any body help me with this?
Chefphillipe
Since I posted this I realized I was backward again. I need a higher front sight to bring my aiming point up, I already have the rear sight set as low as it will go. I get this mixed up all the time.
 

·
Registered
Joined
·
2,473 Posts
Mine has an A and still I have to aim 16" low at 100 yards.

A = 0.537
B = 0.522
C = 0.507
D = 0.492
E = 0.477
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top