Gunboards Forums banner
1 - 1 of 1 Posts

· Moderator / Gold Bullet member
Joined
·
2,672 Posts
There is no silver solder used. Ordinary lead-tin solder. There's a setscrew underneath the removeable blade that holds the sight base in place during the soldering process.

The rear sight base is also held by lead-tin solder and located by a setscrew. Many times the bottom of the setscrew will become soldered during the process.

Dutchman
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top