Gunboards Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,367 Posts
The fact that the "dimple" is round is a tip off. That is not a normal thing.
With low pressure 45/70 loads I would try the Epoxy/ steel fix and watch
things. You are dealing with quite low pressures. While you have the epoxy
mixed add some height to the front sight.
Good luck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top