Gunboards Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
7,281 Posts
Should be no problem, and yes, it isn't there very long.

Think of this. The powder in the case is not all ignited at once, it is lit at the base, and begins to burn foreward. As pressure rises, the bullet leaves, the entire caseful is quite likely not lit at all, even tho burn speed inxcreases as pressure rises, only maybe the bottom 1/2 to 2/3. The rest actually lights as the bullet is moving (and, quite likely) part of it is actually not in the case when it is lit, but in the barrel, pushed out by the gasses in the case that drove it, and the bullet, out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top