Gunboards Forums banner
1 - 1 of 1 Posts

· Banned
Joined
·
1,738 Posts
Had the same problem with the set I bought also, a light cleaning and wire brushing cured all but one of them, I used a worn out bolt and worked the bolt head back and forth and lightly stoned the high spots and it works fine now.

Note: the threads were dinged in storage or shipment and only need a little work.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top