Gunboards Forums banner
1 - 3 of 3 Posts

·
Gold Bullet member
Joined
·
1,654 Posts
Is it the bolt parts that are jammed together outside the rifle or the bolt in the rifle action? If it is in the action, remove the stock and then remove the pin holding the trigger/sear from the receiver/barrel, remove them. The bolt should now be removable. To reassemble, reverse what you just did.
Good luck, Chuck.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top