Gunboards Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
3,503 Posts
Also, you need to either not park the barrel at all or plug the bore. You DO NOT allow parking solution inside the bore.
Don't bead blast the springs, and keep the bead blast away from the frame and slide rails and areas like the hammer notches and the sear and disconnecter, etc. Bead blasting can alter the size and fit of critical areas.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top