Gunboards Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,121 Posts
Discussion Starter · #1 ·
Well here is another load I thought I would show the results of.

Bullet: 140gr hornady A-max
Powder: H4831, 38.6gr
Brass: lee collet neck sized, and factory crimp
Distance: 100yds.

Not too bad. This was the starting load in my hornady book. I tried the next load and the groups opened up. So I didnt try any of the other loads.
 

·
Registered
Joined
·
1,121 Posts
Discussion Starter · #7 ·
I'm not to the point of finding the best charge by increaseing the charge by .1 or .2gr at a time. I simply dont have enough time, or money to do that. (you will go through a lot of bullets and powder like that) So I am mainly sticking to loads in the books, like my hornady book. Its just easyer that way. But if I get data (from other books) that just has a start and max charge, then I will go in .5gr increments.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top