Gunboards Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 9 Results
  1. The Military Mauser Forum
    I thought the safety for my Yugo M48 was stuck in the "fire" position (yes, bolt was in rifle and cocked). I ended up smacking it pretty hard with a rubber mallet and it actually works but requires a lot of force to go from fire -> safe. Going from safe -> locked & safe isn't too bad. But I...
  2. The Military Mauser Forum
    As always, I appreciate the tremendous amount of help I can get from the board members. According to geladen, this one is not on the serial list. It is an all-blued rifle with crest and stamped parts. The bolt assembly # is same to the rifle but the screw got sticky so I can't get a photo at...
  3. The Military Mauser Forum
    Hey everyone I've been thinking about purchasing an M48 Yugo Mauser. I've heard about an importer called Mitchell's Mausers that apparently pretty infamous for what they do to the finish. If possible I would like to avoid getting one of them and instead get a rifle with the original finish...
  4. The Military Mauser Forum
    I am yet again asking for help from the vast knowledge of this board's members. I am looking purchase a yugo m48BO serial number V54XXX. I see that some BO mausers have all blued bolts and sight ladder, and some don't. My syrian m48 indeed have all blued parts; however, the one I am looking at...
  5. The Sniper Rifle Forum
    I know that these rifles are at best field modifications and at worst bubba'ed at someone's garage, but I just gave in to the cool factor of a scope and the fact that my eyes don't work so well anymore. The rifle is a decent deal, comes with the scope and a sling. There are also some interesting...
  6. The K98k Mauser Forum
    I have a Yugo M48 ,chambered in 8mm Mauser, that cracked its' recoil lug, cracked a piece of the stock off, and sheared the rear trigger guard screw. I have a new recoil lug in place now, it is snug and has no play in the stock, and a new rear trigger guard screw. My question is, how should I...
  7. Workbench Forum
    I have a Yugo M48 ,chambered in 8mm Mauser, that cracked its' recoil lug, cracked a piece of the stock off, and sheared the rear trigger guard screw. I have a new recoil lug in place now, it is snug and has no play in the stock, and a new rear trigger guard screw. My question is, how should I...
1-7 of 9 Results
Top