This parts exchange is run as a free service by BANZAI for collectors of Japanese rifles who either are looking for parts for rifles they have or have rifle parts they no longer need. There is no charge to either buyer or seller; all transactions are strictly between buyer and seller.
If you have parts you want to sell or trade please put a realistic price on them and specify whether or not the price includes shipping. Please describe as carefully as possible the condition of the part and whether or not the part is completely original. Repro parts are allowed as long as they are clearly identified as repros.Remember this parts exchange is NOT being run as a business. There is at least for now no charge associated with its use. If you wish to sell a part for say $5 then the potential buyer will contact you directly and arrange payment directly to you.
Try to be realistic with your prices. Although the part may be rare, most parts, unlike complete guns, have value only to the person who needs them. You want to find the parts you need at a reasonable price, so remember that when you set the price on the parts you’re selling since presumably we here are all both buyers and sellers. E-mail me ( SZielinski98@gmail.com ) with a list of the parts you either have to sell or are looking for.
Note: Complete bolts or bolt bodies should be listed in the T99 & 38 Bolt Finder “sticky” on the Japanese Trader Board.
All buyers and sellers will be assigned a 4 digit identification number when registering (with the moderator). There are 2 reasons for this. To organize the information efficiently, i.e., if the same person has 10 parts to sell and these parts are for several different rifles then listing a 4 digit ID with each part will save space instead of listing a full address. Also by using an ID system hopefully we can keep this parts exchange for collectors and not for those whose only interest is buying parts to resell at a profit.
If you want to contact a buyer or seller just send me an email ( SZielinski98@gmail.com ) with the 4 digit ID of the buyer or seller and I will send you his name and e-mail address.
Organization of the Site
To find what you need, first scroll down to the rifle model you need parts for. Then scroll down to the parts group that contains that part. For example, if you’re looking for a front band for a Model 38 rifle, scroll down to Model 38 rifle, and then under Model 38 rifle scroll down to stock as that is the category under which bands are listed. (The organization of this site is subject to change based on users comments and suggestions.) If your category is not listed then that means no one has that part currently for sale. Initially this will be a single list; as the list grows it will be broken down into individual pages for each model.
Hints and Suggestions
Since this is a first try at such a project, CONSTRUCTIVE criticism/comments are encouraged. (E-mail to SZielinski98@gmail.com .)
If you have parts for sale (or trade) you might want to check and see if anyone is looking for those parts before you list them.
If the parts you’re looking for are fairly common you might want to check with the following companies who sell Japanese rifle parts, both original and reproductions. (If anyone knows of additional sources let me know so they can be listed here. This site has no connection with any of the firms or individuals listed here.)
Sarco, Inc. web site www.sarcoinc.com
Springfield Sporters web site www.ssporters.com
Gun Parts Corp. (formerly Numrich) web site www.gunpartscorp.com
Don Valenta who runs the JParts143 Store on www.ebay.com . There is a link to Don's web site in the Links to Other sites section but to make it even easier I have included Don's price sheets for Model 38 and Model 99 below.
Don Voigt at donvoigt@hotmail.com . I have also included Don's price list for Model 38 and Model 99 rifles below as well.
From Doug Farmer (28 August 2006), Pacific Rim Restorations (www.japaneserifleparts.com) also sells Japanese rifle parts.
IF YOU FEEL THAT YOU HAVE BEEN MISLED/CHEATED BY SOMEONE WHO LISTED PARTS HERE E-MAIL ME (SZielinski98@gmail.com ) SO APPROPRIATE ACTION CAN BE TAKEN.
Murata Model 13
| Part name | Buy/sell | Condition (and price) | ID |
Murata Model 18 (rifle and carbine)
| Part name | Buy/sell | Condition (and price) | ID |
Murata Model 22 (rifle and carbine)
| Part name | Buy/sell | Condition (and price) | ID |
Model 30 (rifle and carbine)
| Part name | Buy/sell | Condition (and price) | ID |
| Floorplate | Buy | 1001 | |
| Follower | Buy | 1001 | |
| Front band and insert | Buy | 1001 | |
| Magazine spring | Buy | 1001 |
Model 35 Rifle
| Part name | Buy/sell | Condition (and price) | ID |
Model 38 Rifle
| Part name | Buy/sell | Condition (and price) | ID |
| Action screw | Sell | $3 plus shipping | 1010 |
| Barrel | Sell | $30 plus shipping | 1010 |
| Barrel band | Sell | $8 plus shipping | 1010 |
| Barreled receiver | Sell | Without mum, $35 plus shipping | 1010 |
| Bolt body | Sell | $20 plus shipping | 1010 |
| Bolt release | Sell | Have 3, #304, #630, #409 | 1008 |
| Buttplate | Sell | $8 plus shipping | 1010 |
| Buttplate screws | Sell | $1 plus shipping | 1010 |
| Dust cover | Buy | Need 3, all Kokura #576, #881, #755 | 1008 |
| Extractor | Sell | Have 3, #47 and 2 unnumbered | 1008 |
| Extractor | Sell | $20 plus shipping | 1010 |
| Firing pin | Sell | $20 plus shipping | 1010 |
| Firing pin | Trade | Number 449, believe Mukden proofed | 1004 |
| Firing pin | Buy | Kokura, #881 | 1008 |
| Firing pin spring | Sell | $5 plus shipping | 1010 |
| Rear sight | Sell | $25 plus shipping | 1010 |
| Receiver | Sell | With mum, $50 plus shipping | 1010 |
| Receiver | Sell | Without mum, $20 plus shipping | 1010 |
| Safety | Sell | Large tang safety, number 970, $20 shipped | 1005 |
| Safety | Buy | Small tang #881, Kokura | 1008 |
| Safety | Sell | $30 plus shipping | 1010 |
| Sling swivel | Sell | $3 plus shipping | 1010 |
| Sling swivel screw | Sell | $1 plus shipping | 1010 |
| Stock shim | Sell | $5 plus shipping | 1010 |
| Tang | Sell | $5 plus shipping | 1010 |
| Trigger | Sell | #532 | 1008 |
| Trigger guard | Sell | 1007 | |
| Trigger guard | Sell | $15 plus shipping | 1010 |
| Upper tang | Sell | Have 2 | 1008 |
Model 38 Carbine
| Part name | Buy/sell | Condition (and price) | ID |
| Cleaning rod | Buy | 1009 | |
| Dust cover | Buy | Kokura, #004 | 1008 |
Model 44
| Part name | Buy/sell | Condition (and price) | ID |
Model 97 Sniper
| Part name | Buy/sell | Condition (and price) | ID |
| Scope block | Buy | Kokura | 1003 |
| Scope block spring | Buy | Kokura | 1003 |
Model 99 (long and short)
| Part name | Buy/sell | Condition (and price) | ID |
| AA arms for long rifle | Buy | Original or repro | 1001 |
| Action screw | Sell | $3 plus shipping | |
| Barrel | Sell | $30 plus shipping | 1010 |
| Barrel band | Sell | $8 plus shipping | 1010 |
| Barreled receiver | Sell | Without mum, $35 plus shipping | 1010 |
| Barrel | Sell | Have several for short rifle, some have sights, $25 plus shipping | 1000 |
| Bolt body | Sell | $20 plus shipping | 1010 |
| Bolt release | Sell | Have 2 | 1008 |
| Buttplate | Sell | $8 plus shipping | 1010 |
| Buttplate screws | Sell | $1 plus shipping | 1010 |
| Cleaning rod | Buy | Need 2 good short (4 7/8) rods | 1005 |
| Cleaning rod | Buy | For Nagoya series 4 | 1009 |
| Cleaning rod | Sell | Short screw in type, $35 plus shipping | 1010 |
| Cleaning rod catch | Sell | Square button assembly for early stock, $10 plus shipping | 1010 |
| Dust cover | Buy | Kokura #315, #796, Nagoya #006, #286, Jinsen #184 | 1008 |
| Extractor | Sell | $20 plus shipping | 1010 |
| Firing pin | Sell | $20 plus shipping | 1010 |
| Firing pin | Buy | "A" style, TJK proofed if possible | 1004 |
| Firing pin | Buy | "A" style, TK number 657 | 1004 |
| Firing pin | Trade | Type "A" number 495 | 1004 |
| Firing pin | Buy | TJK, number 290 or no number | 1007 |
| Firing pin | Buy | A, #315, Kokura | 1008 |
| Firing pin | Trade | Trade for like Model 38 parts, have 2 , #917, #709 | 1008 |
| Firing pin spring | Sell | $5 plus shipping | 1010 |
| Follower | Sell | $6 plus shipping | 1010 |
| Follower spring | Sell | $4 plus shipping | 1010 |
| Magazine box | Sell | 1008 | |
| Rear sight | Sell | No provision for AA wings, $25 plus shipping | 1010 |
| Rear sight | Sell | AA wings removed, $20 plus shipping | 1010 |
| Rear sight | Sell | With AA wings, $50 plus shipping | 1010 |
| Receiver | Sell | With mum, $50 plus shipping | 1010 |
| Receiver | Sell | Without mum, $20 plus shipping | 1010 |
| Safety | Buy | Smooth welded, "c" style numbered 314, prefer TJK proofed however could not find any proofs on my other 27th safety so maybe not an issue | 1004 |
| Safety | Buy | Style "A" for TK, number 657 | 1004 |
| Safety | Trade | Type "A" number 495 | 1004 |
| Safety | Trade | Type "A" number 376, I believe TK proofed | 1004 |
| Safety | Buy | Early, Nagoya, knurled, number 099 | 1007 |
| Safety | Buy | Early, Nagoya, knurled, number 687 | 1007 |
| Safety | Buy | Late welded TK number 890 | 1007 |
| Safety | Buy | TJK late welded, number 290 or no number | 1007 |
| Safety | Buy | Kokura, knurled, #315 | 1008 |
| Safety | Trade | Trade for like Model 38 parts, have 3, knurled #917, #709, #244 | 1008 |
| Safety | Sell | $30 plus shipping | 1010 |
| Screw | Buy | Small machine screw that holds the rear sight to top of barrel | 1006 |
| Sling swivel | Sell | $3 plus shipping | 1010 |
| Sling swivel screw | Sell | $1 plus shipping | 1010 |
| Stock shim | Sell | $5 plus shipping | 1010 |
| Tang | Sell | $5 plus shipping | 1010 |
| Trigger | Sell | Have 2 | 1008 |
| Triggerguard | Sell | $15 plus shipping | 1010 |
| Upper tang | Sell | Have 2 | 1008 |
| Wood butt plate | Buy | 1004 |
Model 99 Sniper
| Part name | Buy/sell | Condition (and price) | ID |
Trainers
(Note: Trainer parts are seldom interchangeable.)
| Part name | Buy/sell | Condition (and price) | ID |
Any model not listed above
| Part name | Buy/sell | Condition (and price) | ID |
| Dust cover | Sell | For Siamese | 1010 |
| Cleaning rod | Buy | For Model I | 1011 |
Arisaka Rifle Parts List 7-31-2008
9/18/2008 There are no parts that interchange between the Type 38 6.5 mm rifle and the Type 99 7.7 mm rifle. The T38 has two gas escape holes on the top of the receiver, the T99 one.
Extractor 6.5 or 7.7 $15.00 Trigger 6.5 or 7.7 10.00
Extractor collar 5.00 Front or rear guard screw 8.00
Bolt stripped 6.5 or 7.7 20.00 Tang screw(6.5 out of stock) 12.00
Bolt complete 6.5 or 7.7 95.00 Upper tang 6.5 or 7.7 8.00
Firing pin(striker) 6.5 or 7.7 45.00 Floorplate 6.5 or 7.7 20.00
Firing pin(repaired, when avail, 6.5 or 7.7 35.00
Firing pin spring 10.00 Triggerguard 6.5 or 7.7 15.00
Safety knob 6.5 or 7.7 45.00 (no floorplate or spring)
Front sight 6.5 or 7.7, specify type* 30.00 Floor plate 6.5 or 7.7 15.00
Front sight screw 6.5 10.00 Front sight pin, new, 7.7* 3.00
Barrel, used, fair bore, 6.5 or 7.7 35.00, exc. 55.00 Follower spring 10.00
Rear Sight base, 6.5 or 7.7 8.00 Follower 6.5 or 7.7 24.00
Rear sight ladder 6.5 or 7.7 10.00 Floorplate catch 7.7 10.00
Rear sight slide 6.5 10.00 Magazine box 6.5 or 7.7 8.00
Rear sight slide 7.7 specify type 15.00 Upper orLower barrel band 6.5 25.00
Anti Aircraft slide w/wings 7.7 70.00 Lower barrel band 7.7 35.00
Rear sight ladder retaining screw 8.00 Upper band, bayonet lug 7 , 3 screw 35.00
Ditto, 2 screw 45.00
Rear sight spring 6.5 or 7.7 5.00 Band screw, lower 7.7 12.00
Rear sight base screws set or 2, 6.5 or 7.7 8.00 Lower band retainer 6.5 10.00
Receiver, ground, my choice 25.00 Nosecap 6.5 10.00
Receiver, mummed, when avail. 65.00 Nosecap pin 6.5 3.00
Ejector ass. Complete 6.5 25.00 Cleaning Rod lock 6.5 35.00
With screw and washer 45.00
Ejector screw, 2 req. 4.00ea. Cleaning rod lock ,early 7.7 ,sq. 45.00
Ejector ass, complete 7.7 15.00 transitional round 7.7 45.00
Sear 6.7 or 7.7 5.00 Rear Swivel 6.5 or 7.7 25.00
Single screw rear swivel 7.7 35.00
Sear Pin 6.5 or 7.7 3.00 Rear Swivel screw 6.5 or 7.7 8.00
Sear Spring 6.5 or 7.7 3.00 Lower tang 6.5 8.00
Trigger pin 6.5 or 7.7 3.00 Butt plate 6.5 or 7.7 15.00
Barrel support 6.5 12.00 Butt plate screw, short or long 8.00
Upper band screws, ea., specify 7.7 12.00 Nose cap 7.7 15.00
Rear sight base 6.5 or 7.7 10.00
Lug, stock recoil, 7.7, lge or small 10.00
Wood: (when available) round, no square avail.
Stock set, 6.5 or 7.7 , when available, * $150 Misc. Pins or screws 5.00
Lower stock(butt stock), when available* 110
Handguard* 50
* = requires fitting
Acessories: ( when available)
Dust cover, original, 6.5 55 Cleaning rod, original, as available:
(price may vary depending on condition and marking)
Dust cover, original, 7.7 65 7.7 23.5 inch 65
Monopod, original 7.7 short rifle 150 7.7 short screw in 75 reproduction* 55
6.5 rifle 75
Dust Cover, repro, either 30 6.5 carbine 85
Type I 125
Repro Rods: 99 or 38 $35, short $25, T30 with brass tip $45
T44 and T38 Carbines, T30, Type I:
I do have a few parts for the above, not much selection, please inquire if you have needs.
Please check stock by email before ordering.
I need to buy parts to sell parts, if you have spares please offer them. At present I need T99 safetys and T38 and T99 firing pins and of course wood for all models. Also T44 and T38 carbines parts and wood. If you need parts and have parts to trade that I need, I will exchange with you.
Shipping is a minimum of $2.00 for small, light items. Priority mail is $5.00 up to 1 lb., heavy or other at cost, insurance is extra. Please place orders by email to donvoigt@hotmail.com or mail to me at: Don Voigt, 1984 Yacht Club Drive, Denver, North Carolina 28037.
Reproduction Japanese Militaria Parts List
T-26 Revolver:
1. Lanyard assembly, (stud, securing ring, lanyard ring, and screw) $ 50.00 ea.
2. Main spring $ 35.00 ea.
3. Cleaning rods
Polished steel $ 25.00 ea.
Nickeled $ 35.00 ea.
4. Hammer/sear bar V spring------------------------------------ $ 10.00 ea.
5. Grip screws ------------------------------------------------------$ 10.00 ea.
Nambu Automatic Pistol Type A (Grandpa):
1. Firing pin $ 35.00 ea.
2. Magazine release (body, button, and spring) $ 60.00 ea.
3. Magazine follower $ 40.00 ea.
4. Magazine follower button $ 25.00 ea.
5. Cleaning rod, nickel plated $ 25.00 ea.
Modified 1902 Type Nambu (Papa):
1. Grip screw $ 10.00 ea.
2. Trigger and safety spring $ 15.00 ea.
3. Safety pivot pin $ 5.00 ea.
4. Firing pin $ 35.00 ea.
5. Magazine release (body, button, and spring) $ 60.00 ea.
6. Extractor $ 40.00 ea.
7. Aluminum magazine bottom $ 40.00 ea.
8. Bolt lock and striker guide, original style checkering $ 75.00 ea.
9. Magazine follower button, nickeled--------------------------$ 25.00 ea.
10. Cleaning rod, nickel plated------------------------------------$ 25.00 ea.
Nambu automatic pistol Type B (Baby):
1. Grip screws $ 10.00 ea.
2. Trigger and safety flat spring $ 15.00 ea.
3. Safety pivot pin $ 5.00 ea.
4. Firing pin $ 35.00 ea.
5. Magazine release (body, button, and spring) $ 60.00 ea.
6. Extractor $ 40.00 ea.
7. Bolt lock and striker guide, original style checkering $ 75.00 ea.
8. Cleaning rod, nickel plated $ 25.00 ea.
T-14 Nambu:
1. Grip screw $ 10.00 ea.
2. Firing pin, all types $ 25.00 ea.
3. Firing pin followers, all types $ 25.00 ea.
4. Sear pivot pin, two types $ 10.00 ea.
5. Magazine safety spring button--------------------------------$ 5.00 ea.
6. Extractor $ 40.00 ea.
7. Cocking knobs, two type $ 25.00 ea.
8. Cleaning rods
Blued $ 20.00 ea.
Nickel plated $ 25.00 ea.
9. Retip firing pins: this includes;Grandpa, Papa and Baby $ 25.00 ea.
10. Safety $ 40.00 ea.
11. Magazine retention spring $ 25.00 ea.
12. Magazine retention spring rivet set. 2 rivets and
1 washer $ 15.00 ea.
T-94 Nambu:
1. Grip screw ----------------------------------------------------- $ 10.00 ea.
2. Barrel bushing $ 10.00 ea.
3. Firing pin $ 25.00 ea.
4. Bolt pin $ 15.00 ea.
5. Lanyard ring $ 15.00 ea.
6. Extractor $ 40.00 ea.
7. Magazine buttons: two types $ 15.00 ea.
8. Cleaning rods:
Blued $ 15.00 ea.
Nickel plated $ 20.00 ea.
9. Safety, blued or strawed $ 40.00.ea
T-90 2 and 3 barrel flare pistol:
1. Frame screw $ 10.00 ea.
2. Grip screw $ 10.00 ea.
3. Barrel pivot screw $ 10.00 ea.
4. 3- barrel cocking knob $ 50.00 ea.
5. 3- barrel cocking knob screw $ 15.00 ea.
6. 3-barrel cocking knob spring $ 10.00 ea.
7. 3 barrel cocking knob securing pins (2) $ 5.00 ea.
T-10 Flare pistol:
1. Main spring, same as the T-26 revolver $ 35.00 ea.
2. Grip screw $ 10.00 ea.
3. Other frame screws $ 10.00 ea.
4. Barrel flat spring------------------------------------------------$ 15.00 ea.
T-13 Murata:
1. Firing pin spring-------------------------------------------------$ 50.00 ea.
2. Bolt securing block--------------------------------------------- $ 25.00 ea.
3. Bolt securing block screw--------------------------------------$ 15.00 ea.
4. Cleaning rod; see cleaning rod listing below.
T-18 Murata and Carbine:
1. Firing pin spring--------------------------------------------------$ 50.00 ea.
2. Bolt retaining screw----------------------------------------------$ 15.00 ea.
3. Extractor-----------------------------------------------------------$ 75.00 ea.
4. Cleaning rod: see cleaning rod list below.
T-22 Murata carbine:
1. Trigger spring------------------------------------------------------$ 30.00 ea.
2. Trigger guard screws: front, middle, rear----------------------$ 10.00 ea.
3. Ejector--------------------------------------------------------------$ 40.00 ea.
4. Extractor------------------------------------------------------------$ 50.00 ea.
T-22 Murata rifle:
1. Bolt head retainer-------------------------------------------------$ 50.00 ea.
2. Bolt head retainer screw-----------------------------------------$ 15.00 ea.
3. Ejector--------------------------------------------------------------$ 40.00 ea.
4. Extractor-----------------------------------------------------------$ 50.00 ea.
5. Mag tube follower------------------------------------------------$ 25.00 ea.
T 30 Rifle and Carbine:
1.Tigger guard screws: front, middle, rear---------------------$ 10.00 ea.
2. Extractor---------------------------------------------------------$ 50.00 ea.
3. Ejector-----------------------------------------------------------$ 50.00 ea.
4. Cleaning rod: see cleaning rod listing.
T-38 Rifle:
1. Trigger guard screws: front, middle, rear -------------------$ 10.00 ea.
2. Cleaning rod: see cleaning rod listing.
T-38 Carbine:
1. Trigger guard screws: front, middle, rear--------------------$ 10.00 ea.
2. Rear barrel band------------------------------------------------$ 50.00 ea.
3. Cleaning rod: see cleaning rod listing below.
T- 99 Long rifle:
1. Front and rear band screw $ 10.00 ea.
2. Rear sight wing $ 10.00 ea.
3. Rear sight wing screws $ 5.00 ea.
4. Trigger guard screws $ 10.00 ea.
5. Monopod bolt, nut and assembly $ 15.00 ea.
6. Monopod springs, per set-------------------------------------$ 20.00 ea.
7. Monopod block and pivot pin--------------------------------$ 25.00 ea.
8. Monopod wire--------------------------------------------------$ 25.00 ea.
9. Complete monopod assembly,#5,6,7&8--------------------$ 70.00 ea.
10. Cleaning rod: see cleaning rod listing below.
T-99 Short rifle:
1. Front and rear band screw $ 10.00 ea.
2. Rear sight wing, right or left $ 10.00 ea.
3. Rear sight wing screw $ 5.00 ea.
3. Trigger guard screw $ 10.00 ea.
4. Monopod bolt, nut assembly $ 15.00 ea.
5. Monopod spring------------------------------------------------- $ 25.00 ea.
6. Monopod block and pivot pin---------------------------------$ 25.00 ea.
7. Monopod wire---------------------------------------------------$ 25.00 ea.
8. Complete monopod assembly, # 4,5,6&7--------------------$ 70.00 ea.
9. Cleaning rod: see cleaning rod listing below.
T-99 Sniper rifle:
1. Bolt, body only:
I supply the bolt body $ 80.00 ea.
You supply the bolt body $ 50.00 ea.
2. Scope mount block $100.00 ea.
3. Scope mount block screw $ 10.00 ea.
4. Flat, scope retaining spring $ 50.00 ea.
5. Barrel band and trigger guard screws $ 10.00 ea.
6. 4 power nonadjustable scope, rear knurled eye piece ring $ 50.00 ea.
7. Cleaning rod: see cleaning rod listing below.
T-99 Special Naval Rifle:
1. Trigger guard screws; front, middle and rear-----------------$ 10.00 ea.
2. Rear band screw--------------------------------------------------$ 10.00 ea.
3. Cleaning rod; see cleaning rod listing below-----------------$ 15.00 ea.
T-97 Sniper rifle:
1. Bolt, body only:
I supply the bolt body $ 80.00 ea.
You supply the bolt body $ 50.00 ea
2. Scope mount block $100.00 ea.
3. Scope mount block screws $ 10.00 ea.
4. Flat scope retaining spring $ 50.00 ea.
5. Trigger guard screws $ 10.00 ea.
6. 2.5 power scope locking lever assembly $200.00 ea.
7. Cleaning rod: see cleaning rod listing below.
T- 44 Carbine:
1. Bayonet housing screws, state which model 1st, 2nd,3rd $ 15.00 ea.
2. Trigger guard screws $ 10.00 ea.
3. Bayonet housing stacking hook assembly ------------------$ 65.00 ea.
4. Cleaning rod: see cleaning rod listing below.
T-2 Paratroop rifle:
1. Front and rear barrel band screws------------------------- $ 10.00 ea.
2. Front junction band long screws----------------------------- $ 10.00 ea.
3. Rear junction band short screws--------------------------- $ 10.00 ea.
4. Barrel retention wedge block assembly--------------------- $ 75.00 ea.
5. Wedge block retention screw----------------------------- $ 10.00 ea.
6. Wedge D ring--------------------------------------------- $ 15.00 ea.
7. Cleaning rod: see cleaning rod listing below.
Rifle cleaning rods:
T-13/18 Murata rifle and T-18 carbine------------------------------- $ 30.00 ea.
T-35 & T-30 brass tip: rifle and carbine------------------------ $ 30.00 ea.
T-38 Long, short and carbine -----------------------------------$ 25.00 ea. T-44 Section------------------------------------------------------- $ 25.00 ea.T-99 4 7/8": 5th series, 24th series, or 34th series ------------- $ 15.00 ea.
T-99 Late: 23rd-early 24th series 5 ¾" rod $ 20.00 ea.
T-99 Short rifle: 23 ¾"--------------------------------------- $ 25.00 ea.
T-99 Long rifle: 29 3/16"------------------------------------- $ 25.00 ea.
T-2 Paratrooper: 21 5/16"----------------------------------- $ 25.00 ea.
T-I Italian made rifle: 6.5 mm ---------------------------------$ 25.00 ea.
7/8" Childs trainer--------------------------------------------- $ 20.00 ea.
T-99 Shibata trainer----------------------------------------- $ 20.00 ea.
Mexican Arisaka: Rifle or carbine $ 30.00 ea.
Naval Special T-99: short rod $ 15.00 ea.
Japanese VZ24 $ 25.00 ea.
Trainer cleaning rod: 4 ½", pointed end, drive in $ 15.00 ea.
T-46 / 1903 Siamese Mauser ------------------------------------$ 25.00 ea.
T-66 Siamese (T-38 copy)----------------------------------- $ 30.00 ea.
T-47 Siamese carbine rod 15 7/8"---------------------------- $ 30.00 ea.
T-38 Squad cleaning kit components:
1. Steel brush protector $ 15.00 ea.
2. Folding screwdriver: (a multi-purpose screwdriver
that also fits in the T10 flare pistol holster, and the rifle
squad cleaning kits) $ 30.00 ea.
3. Cleaning rod sections $ 25.00 ea.
4. Brass rotating jag tip $ 25.00 ea.
T-99 Squad cleaning kit components:
1. Cleaning rod sections $ 25.00 ea.
2. Brush protector $ 15.00 ea.
3. Folding screwdriver; (a multi-purpose screwdriver that also fits in the T10 flare pistol holster, and the rifle squad cleaning kits) $ 30.00
T-96 6.5 light machine gun cleaning kit components:
1. Folding screwdriver $ 30.00 ea.
2. Tweezers/tongs (approx. 6" long) $ 25.00 ea.
3. Tapered punch $ 15.00 ea.
4. Gas cylinder carbon scraper $ 15.00 ea.
5. Brass or aluminum Hammer $ 25.00 ea.
Model 92 Field telephone:
1. Generator, crank handle $ 40.00 ea.
2. Brass ground rod $ 30.00 ea.
Miscellaneous:
T-100 Grenade Launcher retaining pin and ring, state which model $ 40.00 ea.
T-100 Grenade Launcher split bushing, state T-38 or T-99 $ 30.00 ea.
T-100 Grenade Launcher bushing spring $ 25.00 ea.
T-100 Grenade Launcher bushing and spring assembly $ 70.00 ea.
T-100 Grenade Launcher chain $ 10.00 ea.
T-100 Grenade Launcher triangular chain securing rings $ 10.00 ea.
T-100 Grenade attaching assembly $130.00 ea.
T-100 Grenade Launcher bullet tube $ 35.00 ea.
Aluminum handled NCO shin-guntosword tassel ring. $ 15.00 ea.
Wood handle NCO sword, screw and tapered nut $ 20.00 ea.
Type 32 Army/ Cavalry sword grip screw and tapered nut set $ 25.00 ea
Model 1879 German Reichsrevolver cylinder axis pin retaining lever $ 75.00 ea.
German, Deutsches Sportmodell .22 rifle (DSM 34), stacking rod $ 25.00 ea.
Mle. 1873 11 mm French revolver lanyard ring assembly $ 50.00 ea.
T-30 bayonet screws $ 10.00 ea.
T-30 bayonet grip screw washers $ 10.00 ea.
T-91 and 97 grenade top, painted black and red $ 30.00 ea.
T-91 and 97 grenade, brass block and firing pin assembly $ 15.00 ea.
T-91 and 97 grenade, external brass firing pin tube $ 25.00 ea.
T-91 and 97 grenade, external tube brass cover--------------------------------- $ 25.00 ea.
T-91 and 97 grenade, brass cover retention pin----------------------------------$ 10.00 ea.
T-91 and 97 grenade firing pin spring-------------------------------------------- $ 5.00 ea.
T-91 and 97 grenade, complete fuse train assembly, all the above parts $ 55.00 ea.
T-91 Grenade booster charge assembly $ 40.00 ea.
T-99 4 power adjustable scope, rear knurled eye piece ring $ 75.00 ea.
T-99 4 power adjustable scope adjusting screws $ 20.00 ea.
Brass sling buckle for the 1 1/8" leather sling----------------------------------- $ 25.00 ea.
Retip Rifle firing pins-------------------------------------------------------------- $ 25.00 ea
T 99 LMG firing pin---------------------------------------------------------------- $ 50.00 ea.
I may be able to make other parts not listed. Most of the parts above were requests at one time. All the parts above are
REPRODUCTIONS. Please let me know what your needs are. All my parts are marked with a prick punch mark to denote they are reproductions. Postage not included. Thank You,Don Schlickman
1470 Wood St
Dubuque, IA 52001
563-556-8496
9-30-08